Others
HR-1000
PURPOSE
DESIGNED TO REMOVE INK STAINS FROM SCREEN MESH.
APPEARANCE
COLOR: DEPENDING ON EXPOSURE TO HEAT AND AGE OF PRODUCT, COLOR VARIES FROM REDDISH-YELLOW TO LIGHT BROWN.
FORM: PASTE/GEL
BENEFITS
HIGHLY EFFECTIVE! REMOVES STAINS FROM MANY DIFFERENT TYPES OF INKS AND EMULSIONS
LOW VOC (VOLOTILE ORGANIC COMPOUND)
SAFE ON MOST MESH
DRAIN SAFE
LOW ODOR
NON-FLAMMABLE
APPLICATION
MIX THIS PRODUCT THOROUGHLY BEFORE USING.
- APPLY HR1000 TO THE INK SIDE OF THE SCREEN. ALLOW THE COATING TO PENETRATE UP TO FIVE MINUTES. FOR TOUGHER STAINS, BRUSH PRODUCT ON BOTH SIDES OF THE SCREEN.
- LOW PRESSURE RINSE (FLOOD RINSE WITH TAP WATER PRESSURE), REMOVING ALL CHEMICAL FILM FROM THE SCREEN. THIS STEP PROTECTS EMPLOYEES FROM CAUSTIC BEING SPLASHED BACK DURING PRESSURE RINSE.
- HIGH PRESSURE RINSE TO REMOVE ANY REMAINING RESIDUE.
CAUTION
THIS PRODUCT CONTAINS, SODIUM HYDROXIDE, A CORROSIVE MATERIAL. IT IS A BLEND OF WATER BASED ALKALINE CLEANERS AND SOLVENT ACTIVE DETERGENTS. A CORROSIVE CHEMICAL CAN CAUSE, WHEN NOT WASHED WITH WATER, VISIBLE DESTRUCTION IN LIVING TISSUES BY CHEMICAL ACTION AT THE SITE OF CONTACT.
PER U.S. DEPARTMENT OF TRANSPORTATION, APPENDIX A TO 40 CFR, PART 173, CORROSIVES DESTROY AND/OR CHANGE THE STRUCTURE OF THE TISSUE AT THE SITE OF CONTACT FOLLOWING AN EXPOSURE PERIOD OF 4 HOURS. ALWAYS WEAR GLOVES, GOGGLES AND OTHER PROTECTIVE APPAREL.
CAUSES IRRITATION TO EYES, SKIN AND RESPIRATORY TRACT. WASH THOROUGHLY AFTER HANDLING. KEEP THIS PRODUCT AND ITS VAPORS AWAY FROM HEAT, SPARKS AND FLAME.
FIRST AID
IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES WITH FRESH WATER FOR AT LEAST 15 MINUTES. CONTACT A PHYSICIAN. WASH SKIN WITH SOAP AND WATER. IF INHALED, MOVE TO FRESH AIR. IF BREATHING DIFFICULTY CONTINUES, GIVE OXYGEN AND OBTAIN MEDICAL ASSISTANCE.
BIODEGRADABLE
CONSIDERED DRAIN SAFE INTO ALL SEWER TREATMENT SYSTEMS. FOR INDUSTRIAL USE ONLY. NON-PHOTOCHEMICALLY REACTIVE.
STORAGE
STORE IN A MODERATELY COOL, DRY, WELL-VENTILATED AREA AWAY FROM DIRECT SOURCES OF HEAT.
