Stencil Making Equipments

G-Stretch 215

G-Stretch 215

The pneumatic G-STRETCH 215 machine allows reaching the maximum stretching values for all types of meshes, with utmost precision

Sizes: SB Screen frame width:750-3000mm/29"-118" SL Screen frame length:750-3000mm/29"-118"

Particular features

■ The mesh is automatically stretched by means of the pneumatic stretching clamps.

■ The simple and user-friendly control module with three separate regulating circuits for the X, Y and Z axes allows an individual adjustment of the stretching power and the stretching speed.

■ The stretching clamps are actuated by means of two manual switches, the fi rst one being destined for the X/Y axes (mesh tension) and the second one for the Z axis (contact pressure onto the frame).

■ The pneumatic system allows an effi cient work process. The required stretching power must only be adjusted for the fi rst Stensol of a series.

■ No contact between frame and mesh during the stretching process.

■ When a mesh is being stretched, the screen frame is pre-bowed with the same counter-stretching force.

■ Should the pre-bowing of the screen frame not be desired, it can be eliminated by means of the four fi xing screws.

■ The stretching machine G-STRETCH 215 can be continuously adjusted within seconds from the largest down to the smallest screen frame format.

■ The DUPLEX G-201 stretching clamps are equipped with concave ball-bearings which are running on stainless steel precision guideway shafts. The DUPLEX clamps can be pushed sideways during the stretching process and are thus capable of compensating the extension of the mesh.

■ The width of a stretching clamp is 250 mm / 10 inch. Due to this ideal width, any irregularities of the mesh can be automatically compensated by each one of the stretching clamps.

Machine sizes
SB Screen frame width
mm/inch
750-3000/29"-118"
 
SL Screen frame length
mm/inch
750-3000/29"-118"
 
Frame profile thickness
mm/inch
20-70 / 0.8"- 2.8"
Options
A.Z.W.
 
 
Overal size
Total length
mm/inch
(2xSL)+80/3.1"
 
Total width
mm/inch
(2xSB)+80/3.1"
 
Total height
mm/inch
860/34"
Travelling distance per
clamp
mm/inch
115/4.5"
 
Compressed air (oil free)
Bar
9
 
Air consumption
lt/min
5 -15

 Option A

■ In the automatic mode, the system offers you totally 50 freely programmable programs.

Option Z

■ If a support plate is inserted into the machine, e.g. in order to stretch several small screen frames at the same time, an additional screen frame support can be fastened on two or on four sides in order to achieve an increased contact pressure.

Option W

■ This option consists of a wooden board with either 4, 6 or 9 adjusting plates (to be selected) for CD screen frames. An angle graduation is engraved into the frames which allows a precise setting of the required value of the angle 0°, 7.5°,15° and 22,5°.

Previous Page   |   Back   |   Next Page